|
|
|
|
| |
| |
|
| |
Figures
1-4: Vertical installation on timber
or PVC-u battens:
-
Screw
the timber battens (size +/- 29 x 22mm)
or the PVC-u battens (P9050, 30 x 20mm)
horizontally to the wall. Ventilation
of battens and the use of PVC-u battens
is advisable in humid rooms.
-
Nail
or staple the start or corner trim onto
the battens.
|
| |
|
-
Fit
the first plank with the tongue into
the trim and nail or staple through
the grooveside flange onto the battens
(nails: min. H16mm x 1,5mm, staples:
min 14mm).
-
The
subsequent planks, tightly joining the
tongue into the groove. fixing distance:
max. 30cm.
Figure
5: Horizontal Installation:
-
Screw
the timber or PVC-u battens vertically
to the wall and follow the above mentioned
instructions.
-
Start
fitting at the top, with the tongue
of the first plank facing upwards into
the trim.
|
|
| Fitting
Made Easy |
| |
| |
| Starline
panels make a perfect ceiling or wall covering.
Installation can be by pinning, stapling or bonding
direct to a wall or ceiling where the surface
is good. If the surface is uneven or damaged,
battens are recommended.
Figure 1-4: Screw either timber (38 x 25mm) or
PVC battens (P9050) horizontally to wall or ceiling
Ventilation is recommended in humid rooms.
- Nail
or staple the start or corner trim onto the
battens.
- Fit
the first panel with the tongue into the trim
and nail or staple through the grooveside flange
onto the battens.
- Fix
the subsequent panels, tightly joining the tongue
into the groove.
Figure
5: Fitting light fittings can be achieved quite
simply, however always consult a qualified electrician
for the correct lighting specification. |
|
| |
|
